ABOUT THIS PAD

When the most delicate touch is required, the Red Hex-Logic Finishing Pad is indispensable. This is our softest and most gentle pad, created for perfectionists and for working with the most sensitive paint finishes. It has zero abrasiveness and is designed exclusively for applying a perfectly thin and even layer of your favorite sealant or wax, guaranteeing a scratch-free shine.

WHY BUY THIS PRODUCT?

• The Softest Touch: The ultra-soft foam provides the most delicate application possible, perfect for soft, freshly sprayed, or sensitive paint finishes.
• Perfect Protection Application: The best choice for applying premium sealants like JETSEAL
  and natural carnauba waxes like BUTTER WET WAX or paste waxes like ХХX HARDCORE CARNAUBA PASTE WAX.
• Completely Safe: A fully non-abrasive composition ensures you apply a protective layer without leaving any scratches or marks on the surface.
• Hex-Logic Technology: Patented hexagonal grooves distribute product in an extremely thin layer, which ensures proper curing and maximum effectiveness.
• Deep Wet Shine: Helps create the final layer of deep, rich gloss that is the crowning achievement of any detail.

HOW TO USE

1. Center the polishing pad perfectly on your machine's backing plate.
2. For best results, lightly prime the pad's surface with Polishing & Buffing Pad Conditioner (BUF301).
3. Apply 4-5 small drops of your favorite Chemical Guys sealant or wax to the pad's face.
4. Spread the product over the working section on the lowest speed setting (1-2).
5. Increase the speed to 3 and evenly apply the product over the surface using light, no-pressure passes to create a thin, even coat.
6. After application, allow the product to dry/cure according to the sealant's or wax's instructions, then buff off the residue with a clean premium microfiber towel.
7. After the job is done, thoroughly clean the pad with Foam & Wool Citrus-Based Pad Cleaner (BUF333_16)