ABOUT THIS KIT

Get the full power of the complete Hex-Logic polishing system in your hands! This three-piece set of hand polishing applicators brings our time-tested technology from machine pads into a convenient handheld format. Now you can cut, polish, and apply protection in any hard-to-reach area where a polisher can't go, and achieve flawless results at every step.

WHY BUY THIS PRODUCT?

• A Complete Polishing System: The kit includes everything you need for a full paint correction and protection cycle: cutting, polishing, and finishing.
• Orange Cutting Applicator: Use it with compounds (V32, V34) or universal polishes (VSS) to remove moderate swirls, scratches, and oxidation.
• White Polishing Applicator: Perfect for the second step. Work with finishing polishes (V36, V38) to remove holograms and light defects, restoring a deep, glossy shine.
• Black Finishing Applicator: Completely non-abrasive, designed for applying a perfectly thin layer of glaze, sealant, or wax for maximum shine and protection.
• Hex-Logic Technology: All applicators feature unique hexagonal grooves that distribute product evenly, reduce heat, and ensure consistent results.
• Perfect for Hard-to-Reach Areas: Easily tackle door handles, pillars, emblems, bumpers, and any other intricate areas.

HOW TO USE

1. Preparation: Thoroughly clean and dry the surface. For best results, decontaminate with a clay bar first.
2. STEP 1: CORRECTION (Orange Applicator)
   • Apply 3-5 drops of compound or polish to the orange applicator.
   • Work the product into a small section using a cross-hatch pattern. Wipe away residue with a clean microfiber towel.
3. STEP 2: POLISHING (White Applicator)
   • Apply 3-5 drops of finishing polish to the white applicator.
   • Repeat the process on the same section to remove light marks from the previous step and enhance gloss. Wipe away residue.
4. STEP 3: PROTECTION (Black Applicator)
   • Apply a few drops of your favorite glaze, sealant, or wax to the black applicator.
   • Spread the product evenly over the surface with light, no-pressure passes. Allow to dry according to the product's instructions, then buff to a shine with a clean microfiber towel.