Professional InSynchro Compound Kit: From Deep Correction to Finish
 

A flawless clear coat requires a proper and systematic approach. This comprehensive InSynchro bundle is designed to take a vehicle through all stages of polishing: from aggressive removal of the deepest scratches to delivering an unmatched mirror-like shine. It is an excellent solution for both professional detailing studios and demanding automotive enthusiasts who value flawless results.

What's included in the bundle:

• Step 1: InSynchro Supreme Cut Extreme Compound (473ml) — Heavy cut compound. Quickly and effectively removes deep scratches, oxidation, sanding marks, and severe clear coat defects. It works intensively, saving time during the hardest stages of paint correction.

• Step 2: InSynchro V43 Precision Cut Compound (473ml) — Medium cut polishing compound. Designed to remove holograms, medium scratches, and hazing that might have been left after the first step. It levels the surface and perfectly prepares it for the finishing touch.

• Step 3: InSynchro V45 Supreme Finish Polish (473ml) — Fine finish polish. The final stage that reveals maximum color depth and provides a crystal-clear, mirror-like shine with no holograms.

Why choose this bundle:

• Systematic approach: The formulas are developed to perfectly complement each other at every stage of the process.

• Professional grade: Works effectively with both Dual Action (DA) and rotary polishers.

• Minimal dusting: Modern water-based formulas do not create excessive dust and are easy to wipe off.

Instructions for use:

1. Thoroughly wash the vehicle and perform deep cleaning (decontamination) using a detailing clay bar.

2. Apply 4-5 drops of the Supreme Cut compound to a heavy cutting pad. Spread the compound over an area of approximately 40x40 cm and work until deep defects are removed. Carefully wipe off the residue with a clean microfiber towel (for even residue removal and clear coat safety, a microfiber with both sides having the same pile length works best).

3. Switch to a medium cutting pad and apply the V43 compound. Polish the surface to remove micro-marring from the previous step.

4. For the final shine, use a soft foam finishing pad and the V45 polish. Work at low or medium speeds until an ideal gloss appears.

5. After finishing the polishing process, degrease the surface. If you plan to apply classic protection, follow the correct sequence: apply glaze first, then sealant, and only then wax.